Connecting your devices

First step

Check your Rhopoint Device has Bluetooth turned on the ID is turned on and the BT mode is set to DATA or DATA+ *. See instrument manual Control Screen.

BT Mode set to DATA will only transmit the measured results. BT Mode set to DATA+ will transmit measured results and data for the 20deg GONIO curve.

Press the pairing/link button on the top right-hand corner of the App.

From the drop-down menu select the connect. Then select device that you would like to connect.

When an instrument is connected, the button will turn green. The App is now ready to accept readings from the connected device.